Schuette® Pleated Skylight Roof Blind Made to Measure with Drilling • Honeycomb Collection: Sunburst (Yellow) • Profile colour White

Of course. What's more, no tools are required for installation!

Our pleated blackout blind achieves the maximum possible room darkening that is possible with a tensioned pleated blind. No light passes through the fabric and the drill holes run inside the cell and are not visible. Light can only enter the room through light gaps on the sides of the honeycomb pleated blind.

Our honeycomb fabrics are designed in such a way that they do not allow light with a light intensity of 30,000 lux to pass through. The light intensity of normal daylight is generally below this value, e.g. a light intensity of less than 10,000 lux is achieved in winter when the sky is overcast and around 20,000 lux in summer when the sky is overcast. In unfiltered, direct sunlight, light levels can exceed 30,000 lux. In such cases, some light can shine very weakly through the fabric at the points where the honeycomb cells are glued together. The light then shines diffusely through the fabric at these points and only has a very low light intensity. Even in such cases, the darkening performance of the honeycomb fabric is > 99%.

No! There is no question that honeycomb pleated blinds can achieve thermal blackout. They do not allow any light or views through and offer maximum privacy and maximum room darkening.

Yes, you can save energy and therefore money with our pleated blackout blinds. The blackout honeycomb fabrics do not let any light through and can keep up to 2/3 of the sun's heat out of the room. Whether honeycomb pleated blinds offer thermal protection can therefore be summarised with a brief yes: In summer you need to cool less and in winter the pleated blinds reduce rapid heat loss from the window. The room therefore retains a pleasant temperature for longer, there is no need for additional help and this saves electricity.

A thermal pleated blind is fitted with opaque fabrics that have a heat protection finish to increase light reflection and at the same time reduce light transmission and absorption. However, daylight should still pass through the fabric so that rooms can still be used for various applications without having to use artificial light sources, e.g. living and working in the living room and study. A real pleated blackout blind is primarily intended to darken a room. As the fabric does not let any light through at all, it also keeps heat out of the room in summer and in the room in winter. Anyone who has already had experience with honeycomb pleated blinds can confirm the difference to conventional thermal pleated blinds. Once honeycomb pleated

The ideal size to order is: 76.3x139cm. We always subtract the space for the side guide rails from the width.

A pleated blind is closed every evening, opened again in the morning and adjusted to the desired position. This makes it one of the most frequently moved pleated blinds. A particularly firm and stable fixing is very important for a pleated blind that is used frequently. For this reason, we recommend our particularly stable premium clamp bracket "For tightening" for pleated blinds without drilling. This clamp can be tightened again and again with the supplied spanner if it has become loose over time due to frequent use. However, the firmest, most stable and most permanent way of attaching a pleated blind to a window is always by screwing, although this requires drilling. For pleated blinds with drilling, we offer two screw fixing options, with mounting plates in the glazing bead or with angle brackets ("Double 2in1") in front of the glazing bead.

The glazing bead on a window is the small moulding frame that holds the window pane and the rubber seal in position. On PVC windows and metal windows, this moulding is hollow and can be drilled (also on wooden windows). A window fitter who wants to change a pane of glass will remove these glazing beads to access the pane. Glazing beads can be reordered as spare parts.

Yes, that is possible. Each Schuette® pleated blind for drilling is supplied with four different retaining plates that can compensate for different inclinations of glazing beads and even roundings. However, the glazing bead should be at least 10 mm deep so that there is enough space between the glass pane and the pleated blind fabric to allow air to circulate and so that there is room for the bracket. If the glazing bead is not 10 mm deep, then angle mounting or clamp and adhesive brackets are suitable.

No. This is a quality product that has been specially developed. We value your time and your "home" too much, which is why the pleated blind is assembled as far as possible to ensure safe transport.

Yes, all our brackets are subjected to regular tests and are designed to work perfectly even with the maximum dimensions.

Our pleated blind fabrics can be used in damp rooms.

Please contact our customer service to receive fabric samples of our pleated blinds, roller blinds & curtains and other home textiles. You only pay the smallest possible shipping fee plus 0.01 Euro (1 cent) per fabric sample so that our system does not go crazy.

The brackets are designed so that they can be easily replaced with other Schuette® brackets if necessary. Please contact our customer service for more information as changes may need to be made to the pleat dimensions.

The scope of delivery includes the fixings selected in our pleated blind configurator, the handles for pulling up and down, the side guide rails, installation instructions with a link to the video instructions and an invoice sent by email.

Of course you can open the skylight and thanks to our stable and aesthetic guide rails, so-called "sagging" is prevented.